The Dana Spicer 917093-2924 or 9170932924 is a welded steel driveshaft built to the 1810 Series standard. The steel tube measures 4.59 x 0.180 inches (116.7 x 4.57 mm) with a tube length of 29.75 inches (755.65 mm). Center-line-to-center-line collapsed length is 46.7618 inches (1,187.75 mm); installed length is 49.2618 inches (1,251.25 mm). Maximum slip travel is 5.0 inches (127.0 mm), with a mid-slip position of 2.5 inches (63.5 mm). The assembly ships with two universal joints already included, phased at 0 degrees, and is rated for a 30-degree joint angle. A genuine Dana Spicer part, sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Dana Spicer 1810 Series welded steel driveshaft
Tube dimensions: 4.59 x 0.180 in. (116.7 x 4.57 mm)
Tube length: 29.75 in. (755.65 mm)
Collapsed C/L-to-C/L length: 46.7618 in. (1,187.75 mm); installed: 49.2618 in. (1,251.25 mm)
Maximum slip: 5.0 in. (127.0 mm); mid-slip: 2.5 in. (63.5 mm)
Includes 2 universal joints, 0-degree phasing, 30-degree joint angle rating
Tech Specs
- Series: 1810
- Shaft Material: Steel
- Tube Size: 4.59 x 0.180 in. (116.7 x 4.57 mm)
- Tube Length: 29.75 in. (755.65 mm)
- C/L Yoke to C/L Yoke - Collapsed: 46.7618 in. (1,187.75 mm)
- C/L Yoke to C/L Yoke - Installed: 49.2618 in. (1,251.25 mm)
- Max Slip: 5.0 in. (127.0 mm)
- Mid Slip: 2.5 in. (63.5 mm)
- Universal Joints Included: Yes - 2
- Joint Angle: 30 degrees
- Phased: No (0 degrees)
- Assembly: Welded
