The Dana Spicer E1322I steer axle assembly, part number 1322BN103-115 or 1322BN103115, is a light-duty front steer axle built to Spicer's E1322 specification. The beam spring mount center-to-center measures 34.00 inches, with a drill pattern length of 4.81 inches and width of 4.25 inches. Beam drill hole diameter and center drill diameter are both 0.81 inches, with a center drill depth of 0.78 inches. King pin inclination (KPI) is 69.00 degrees. Turn angle on both the left-hand and right-hand sides ranges from 30 to 50 degrees. The tie rod thread specification is 1.50-18 UNEF-2A. Call us to confirm proper fit for your specific application.
Features
Dana Spicer E1322 model steer axle assembly
King pin inclination (KPI): 69.00 degrees
Beam spring mount center-to-center: 34.00 inches
Drill pattern: 4.81 in. length x 4.25 in. width, 0.81 in. hole diameter
Turn angle (LH and RH): 30 to 50 degrees
Tie rod thread: 1.50-18 UNEF-2A
Tech Specs
- Model: E1322
- KPI: 69.00 degrees
- Beam Spring Mount Center-to-Center: 34.00 in.
- Beam Drill Pattern Length: 4.81 in.
- Beam Drill Pattern Width: 4.25 in.
- Beam Drill Hole Diameter: 0.81 in.
- Beam Center Drill Diameter: 0.81 in.
- Beam Center Drill Depth: 0.78 in.
- Turn Angle LH: 30 - 50 degrees
- Turn Angle RH: 30 - 50 degrees
- Thread: 1.50-18 UNEF-2A
