The Dana Spicer 220BN107-15 or 220BN10715 is a bare steer axle assembly in the D2000F series. It features a king-pin inclination (KPI) of 68.04 inches and a 3.50-inch drop, with beam spring mount centers at 34.00 inches. The spindle nut thread is 1.750-12 UNF-2A. Beam drill hole diameter is 0.94 in., drill pattern length 4.94 in., and drill pattern width 4.25 in. Turn angle runs 25 to 40 degrees on both left-hand and right-hand sides. Call us to confirm proper fit for your application.
Features
Dana Spicer D2000F series steer axle assembly
King-pin inclination (KPI): 68.04 inches
Drop: 3.50 inches
Beam spring mount center to center: 34.00 inches
Spindle nut thread: 1.750-12 UNF-2A
Turn angle LH and RH: 25 to 40 degrees
Tech Specs
- Series: D2000F
- KPI: 68.04 in.
- Drop: 3.50 in.
- Beam Spring Mount Center to Center: 34.00 in.
- Spindle Nut Thread: 1.750-12 UNF-2A
- Turn Angle LH: 25 - 40 degrees
- Turn Angle RH: 25 - 40 degrees
- Beam Center Drill Depth: 0.78 in.
- Beam Center Drill Diameter: 0.81 in.
- Beam Drill Hole Diameter: 0.94 in.
- Beam Drill Pattern Length: 4.94 in.
- Beam Drill Pattern Width: 4.25 in.
