Dana Spicer part number 10025889 is a left-hand steering knuckle assembly designed for E-1202 and E-1462 series front axles. Key dimensions include a king pin bore of 2.0579-2.0570 in., spindle large diameter of 2.6234-2.6245 in., spindle small diameter of 1.7487-1.7497 in., boss-to-end length of 7.550 in., and boss-to-locknut length of 5.940 in. The knuckle features seven caliper mounting holes (16.730 mm diameter), a 0.867 in. sensor hole, a 0.625-18 UNF-2A stop bolt hole, and a 1.500-18 UNEF-2A wheel-end thread. A genuine Dana Spicer part available from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Interchanges:
- EH10025889
Features
Dana Spicer part number 10025889
Left-hand (driver-side) steering knuckle assembly
Fits E-1202 and E-1462 series front axles
King pin bore diameter: 2.0579-2.0570 in.; boss-to-end length: 7.550 in.
Spindle large diameter 2.6234-2.6245 in.; small diameter 1.7487-1.7497 in.
Seven caliper mounting holes; wheel-end thread 1.500-18 UNEF-2A; stop bolt hole 0.625-18 UNF-2A
Tech Specs
- Series: E-1202, E-1462
- Side: Left Hand
- King Pin Bore Diameter: 2.0579-2.0570 in.
- Length (Boss to End): 7.550 in.
- Length (Boss to Locknut): 5.940 in.
- Spindle Large Diameter: 2.6234-2.6245 in.
- Spindle Small Diameter: 1.7487-1.7497 in.
- Caliper Mounting Hole Diameter: 16.730 mm
- Caliper Mounting Hole Quantity: 7
- Sensor Hole Diameter: 0.867 in.
- Stop Bolt Hole: 0.625-18 UNF-2A
- Wheel-End Thread Type: 1.500-18 UNEF-2A
