The Dana Spicer 15-3147X (also cataloged as 153147X) is a 1310 series universal joint designed for both front and rear driveshaft positions, including CV applications at the transfer case, transmission, support bearing, and front or rear axle. Both bearing caps measure 1.125 in. (28.575 mm) in diameter and use a round cap with an internal snap ring (ISR) groove. Distance between snap ring grooves is 2.556 in. (64.922 mm). The cross includes a grease zerk on the side of the cross body, and snap rings are included. This joint corresponds to OEM series S44/3R. Call us to confirm the right fit for your application.
Features
1310 series universal joint, OEM series S44/3R
Bearing cap diameter: 1.125 in. (28.575 mm), both caps, round with ISR groove
Cap span (distance between snap ring grooves): 2.556 in. (64.922 mm)
Internal snap rings included; grease zerk located on side of cross
Greaseable design - not pre-greased; grease zerk included
Steel construction; mounting hardware not included
Tech Specs
- Series: 1310
- OEM Series: S44/3R
- Bearing Cap Diameter: 1.125 in. (28.575 mm) - both caps
- Bearing Cap Type: Round with ISR (Internal Snap Ring) groove
- Snap Ring Type: Internal
- Snap Rings Included: Yes
- Distance Between Snap Ring Grooves: 2.556 in. (64.922 mm)
- Greaseable: Yes
- Pre-Greased: No
- Grease Zerk Included: Yes
- Grease Fitting Location: Side of cross
- Material: Steel
- Mounting Hardware Included: No
- Driveshaft Positions: Front Driveshaft at Front Axle, Front Driveshaft at Transfer Case, Front Driveshaft - CV at Transfer Case, Rear Driveshaft at Rear Axle, Rear Driveshaft at Transmission, Rear Driveshaft at Support Bearing, Rear Driveshaft - CV at Rear Axle, Rear Driveshaft - CV at Transmission, Rear Driveshaft - CV at Support Bearing
