K-3696 Eaton Fuller Master Rebuild Kit

The Eaton Fuller K-3696 or K3696 is a Master Rebuild Kit covering the RTX-11710C, RTX-12710C, and RTX-13710C transmission models. The kit ships with more than 60 individual components sourced directly from Eaton Fuller, including bearings (main case countershaft front bearings, reverse gear idler shaft bearings, and additional bearings throughout), snap rings, sliding clutches, a front bearing cover, a main drive gear, a countershaft gear set, an input shaft assembly, a range slave valve assembly, a low-range synchronizer assembly, an auxiliary direct synchronizer assembly, air hose assemblies, an air filter/regulator assembly, a clutch brake disc assembly, an O-ring kit, a gasket kit, an oil seal with slinger, a shim kit, and a mainshaft key. Call us to confirm proper fit for your application before ordering.

Features

Fits Eaton Fuller RTX-11710C, RTX-12710C, and RTX-13710C transmissions
Includes bearings: main case countershaft front (x2), reverse gear idler shaft (x2), ball bearing, and additional bearings
Synchronizer assemblies: low-range (A-7254) and auxiliary direct (A-7331) included
Range slave valve assembly (A-5000) and air filter/regulator assembly (A-4740) included
Air hose assemblies, snap rings, sliding clutches, gasket kit, O-ring kit, shim kit, and oil seal with slinger all included
Genuine Eaton Fuller part, sold by Pro Gear and Transmission

Additional Information

Kit Contents, Eaton Fuller K-3696 Master Rebuild Kit
Bearings: Main case countershaft bearing front (4308397) x2, Reverse gear idler shaft bearing (4308403) x2, Bearing (4302074-BOX) x4, Bearing (4308452) x2, Bearing (21355-BOX) x1, Ball bearing (81504) x1, Bearing (5566507-BOX) x1
Snap rings and retainers: Snap ring (14317) x2, Snap ring (14750) x1, Snap ring (16763) x2, Snap ring (16980) x1, Snap ring retainer (21320) x1, Retaining ring (4303336) x2
Gears: Main drive gear (22961) x1, Countershaft gear (4305665) x2, Gear (23102) x1
Synchronizers and clutches: Synchronizer assembly low-range (A-7254) x1, Synchronizer assembly aux direct (A-7331) x1, Sliding clutch (20323) x1, Sliding clutch (4306647) x1, Clutch brake disc assembly (85541) x1
Valves and air components: Range slave valve assembly (A-5000) x1, Air filter/regulator assembly (A-4740) x1, Air hose assembly (55508) x2, Air hose assembly (55518) x1, Air hose assembly (55523) x1, Elbow 1/8 x 90 degree (12845) x3, Triple hose clamp (21427) x1, Triple hose clamp (21428) x1, Breather 1/4 (4304602) x1
Seals and gaskets: O-ring kit (K-2054) x1, Gasket kit (K-2061) x1, Oil seal with slinger (K-2262) x1, O-ring (15918) x3, O-ring (5568542) x1
Shafts and covers: Input shaft assembly (S-1659) x1, Front bearing cover (20550) x1, Mainshaft key SPL (4304614) x1
Fasteners, washers, and hardware: Washer (22899) x1, Washer (4300382) x4, Washer (4300383) x2, Washer (4300384) x1, Washer (4300830) x2, Washer (4304722) x1, Yoke 3rd and 4th (4305575) x1, Spacer (22898) x1, Ball steel 1/2 in. (X14 800) x3, Collet (83002) x4, Connector straight (84004) x1, Connector elbow (85001) x1, Plug pipe 1/8 in. (X12 208) x1, Plug pipe 3/4 in. magnetic (X12 1207) x1, Plug pipe 1-1/4 in. magnetic (X12 2007) x1
Miscellaneous: Magnetic disc (14373) x2, Bushing clutch release shaft (12815) x4, Spring (14897) x3, Spring position finder (15918) x3, Shim kit (K-2805) x1, Sealant (71205) x1, Instruction letter (L-2013-02) x1
Note: Component 21262 (countershaft gear) is listed in the kit bill of materials but is designated no longer available by Eaton Fuller.