The Eaton Fuller K-3722 or K3722 Master Rebuild Kit covers Fuller 9210, 11210, 12210, 13210, 14210, 15210, 16210, 17210, and 18210 Series transmissions. This comprehensive kit includes bearings for the main case countershaft, reverse gear idler shaft, and input shaft; a sliding clutch; synchronizer assemblies for low-range and auxiliary direct; a complete gasket kit (K-2921); shim kit (K-2805); hex flange crimped nut kit (K-4122); oil seals; O-rings; snap rings; detent plungers and springs; a countershaft OD gear pair; main drive gear; and silicone lubricant. A genuine Eaton Fuller part, sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Interchanges:
- 900475
- MACK 2719-K3722
- MACK 3088-K3722
Kit Contains (59 parts):
| Qty | Part Number | Description |
| 4 | 12815 | Clutch Release Shaft Bushing |
| 1 | 13571 | O-Ring |
| 1 | 14197 | O-Ring |
| 3 | 14373 | Magnetic Disc |
| 1 | 14765 | O-Ring |
| 3 | 14897 | Spring |
| 1 | 16980 | Snap Ring |
| 1 | 17399 | Snap Ring |
| 1 | 20423 | O-Ring |
| 1 | 20550 | Front Bearing Cover |
| 1 | 22898 | Spacer |
| 1 | 4300924 | Sliding Clutch |
| 1 | 4302070 | Snap Ring |
| 4 | 4302074-BOX | Roller Bearing or 4302074 |
| 2 | 4302080 | Snap Ring |
| 2 | 4302081 | Snap Ring |
| 2 | 4302082 | Snap Ring |
| 1 | 4302133 | Plunger Selection Bias |
| 1 | 4302138 | Compression Spring |
| 1 | 4302139 | Compression Spring |
| 1 | 4302177 | Piston |
| 1 | 4302184 | Snap Ring |
| 1 | 4302243 | Washer |
| 2 | 4302258 | Washer |
| 1 | 4302312 | Gear Spacer |
| 1 | 4302316 | Special Key |
| 1 | 4302322 | Oil Seal |
| 1 | 4302323 | Slinger |
| 2 | 4303121 | Countershaft Gear |
| 1 | 4303287 | Actuator Pivot Pin |
| 2 | 4303336 | Retainer Ring |
| 1 | 4303362 | Snap Ring |
| 1 | 4303742 | Gasket Int Cooler |
| 1 | 4304438 | Yoke |
| 1 | 4304604 | Selector Key |
| 2 | 4304618 | Countershaft Gear |
| 1 | 4304642 | Main Drive Gear |
| 1 | 4304722 | Washer |
| 1 | 4304750 | Mainshaft Gear |
| 1 | 4306649 | Clutch Slg M/S |
| 4 | 4308400 | Roller Be |
| 2 | 4308403 | Needle Bearing |
| 1 | 4308451 | Roller Bearing |
| 1 | 5556503-BOX | Roller Bearing or 5556503 |
| 1 | 5566507-BOX | Bearing Ball or 5566507 |
| 1 | 5568507 | O-Ring |
| 1 | 5568511 | O-Ring |
| 1 | 5568542 | O-Ring |
| 1 | 71206 | Silicone Lube |
| 2 | 84003 | Straight Connector |
| 1 | A-7254 | Synchronizer Assembly Low Side |
| 1 | A-7331 | Synchronizer Assembly Auxiliary Direct |
| 1 | K-2805 | Shim Kit |
| 1 | K-2921 | Gasket Kit |
| 1 | K-4122 | Hex Flange Crimped Nut Kit |
| 1 | S-2822 | Input Shaft Assembly |
| 1 | X12-208 | Pipe Plug |
| 1 | X12-1207 | Pipe Plug Magnetized |
| 1 | X12-2007 | Pipe Plug Magnetized |
Features
Fits Fuller 9210, 11210, 12210, 13210, 14210, 15210, 16210, 17210, and 18210 Series transmissions
Includes main case countershaft bearings (x4), reverse gear idler shaft bearings (x2), and input shaft bearing (x1)
Synchronizer assemblies included: low-range (A-7254) and auxiliary direct (A-7331)
Contains gasket kit K-2921, shim kit K-2805, and hex flange crimped nut kit K-4122
Includes sliding clutch, oil seal, O-rings, snap rings, detent plungers, springs, and silicone lubricant
Used in these Eaton Fuller models