The Fabco 348C-40021 or 348C40021 is an adapter with a 3/4 FNPT end and a #12 tube end. FNPT is a female tapered pipe thread, so this end takes a matching male pipe-thread fitting, while the tube end takes the line. A genuine Fabco part from Pro Gear and Transmission.
A fitting that is going bad shows itself as seepage or drips at the joint, though the wet spot is not always where the leak starts, so check the line above it before blaming the fitting. Damaged threads, or a joint that was tightened too little or too much, will weep. Tapered-thread connections are made to seal on first assembly rather than be reused, so one that has been backed out and retightened is a replacement candidate. Call us to confirm proper fit for your application.
Features
Fabco adapter, part number 348C-40021 or 348C40021
3/4 FNPT end (female tapered pipe thread)
#12 tube end
Package dimensions 4.35 x 2.45 x 1.35 in. (L x W x H)
Watch for seepage or drips at the joint and for damaged threads when judging wear
Unit pack of 1
Tech Specs
- Brand: Fabco
- Part type: Adapter
- Pipe thread end: 3/4 FNPT
- Tube end: #12
- Package dimensions (L x W x H): 4.35 x 2.45 x 1.35 in.
- Unit pack: 1
