The Fabco 348C-10029 or 348C10029 is a straight fitting with a 3/8 NPT end and a #6 JIC end. NPT is a tapered pipe thread and JIC is a flared connection, so the two ends run in a straight line with no change of direction. A genuine Fabco part from Pro Gear and Transmission.
A fitting that is going bad shows itself as seepage or drips at the joint, though the wet spot is not always where the leak starts, so check the line above it before blaming the fitting. Damaged threads, or a joint that was tightened too little or too much, will weep. Tapered-thread and flared connections are made to seal on first assembly rather than be reused, so one that has been backed out and retightened is a replacement candidate. Call us to confirm proper fit for your application.
Features
Fabco straight fitting, part number 348C-10029 or 348C10029
3/8 NPT end (tapered pipe thread)
#6 JIC end (flared connection)
Straight body with no change of line direction
Watch for seepage or drips at the joint and for damaged threads when judging wear
Unit pack of 1
Tech Specs
- Brand: Fabco
- Part type: Straight fitting
- Pipe thread end: 3/8 NPT
- Flared end: #6 JIC
- Unit pack: 1
