Fabco 788-0549-001 or 7880549001 stud, 1/2 X 2 3/8, double ended, is a genuine OEM Fabco hardware part sold by Pro Gear and Transmission. It is threaded at both ends and has no head, and it is packed as a single stud.
A double ended stud works differently from a bolt: one end runs into a tapped hole and the other takes a nut that draws the mating part down. Because the stud stays put in the housing, the nut can come off and go back on again and again without wearing the threads in the housing itself. Check studs before reuse. Threads that are deformed, damaged or stripped cannot hold their clamp load, and vibration over time can let a threaded joint work loose, so replace a worn stud instead of reusing it.
Not sure this is your part? Give us a call to confirm fit for your Fabco unit.
Features
Fabco part 788-0549-001 or 7880549001, stud, 1/2 X 2 3/8
Double ended, threaded at both ends with no head
Genuine OEM Fabco hardware
Supplied as a single stud, unit pack 1
One end seats in a tapped hole while the other takes a nut, so the housing threads are spared when the nut is removed
Replace studs with damaged or stripped threads rather than reusing them
Tech Specs
- Brand: Fabco
- Part number: 788-0549-001
- Part type: Stud, double ended
- Size: 1/2 X 2 3/8
- Package dimensions (L x W x H): 2.30 x 0.45 x 0.45 in.
- Unit pack: 1
- Product group: Hardware
