The Muncie A30-A1007-MX3CBPW (also shown as A30A1007MX3CBPW) is a 10-bolt constant drive power takeoff engineered for Allison 3000 and 4000 Series transmissions. The rotatable pump flange allows flexible mounting orientation, and three available housing arrangements let it fit a range of installation configurations. Tapered roller bearings extend service life, while the increased-diameter output shaft handles higher drive loads. Extended-length PTO mounting fasteners and increased clearances simplify installation, and the unit is compatible with the EX Drive shaft extension. Gear geometry is optimized for reduced operating noise. A single intermittent/continuous torque rating covers both duty cycles, simplifying spec selection. Call us to confirm proper fit for your application.
Features
10-bolt constant drive PTO for Allison 3000 and 4000 Series transmissions
Rotatable pump flange for flexible mounting orientation
Three housing arrangements to suit different installation requirements
Tapered roller bearings for extended PTO service life
Increased output shaft diameter for higher drive load capacity
Compatible with EX Drive shaft extension
Tech Specs
Additional Information
| SPEED | 3000 SERIES | 4000 SERIES | INTERMITTENT CONTINUOUS HP (KW) | INTERMITTENT/CONTINOUS |
| RATIO | ENGINE % | ENGINE % | @ 1,000 RPM | TORQUE LBS.FT. (NM) |
| 5 | 74% | 105% | 77 (57) | 400 (542) |
| 6 | 85% | 122% | 77 (57) | 400 (542) |
| 7 | 99% | 141% | 79 (59) | 415 (563) |
| 8 | 114% | 163% | 69 (51) | 360 (488) |
| 9 | 122% | 175% | 65 (48) | 340 (461) |
| 10 | 131% | 187% | 59 (44) | 310 (420) |
| 11 | 151% | 215% | 52 (39) | 275 (373) |
| 12 | 162% | 231% | 50 (37) | 265 (359) |
| 15 | 201% | 287% | 39 (29) | 205 (278) |
