The Meritor 04-16062-007 (also 0416062007) is a conventional hub-only assembly for R-series drive axles rated at 27,000 lb GAWR. It ships without bearings pre-installed (not fully dressed) and is designed for outboard drum brake configurations. Key dimensions: wheel pilot diameter 8.653/8.646 in., drum pilot diameter 8.778/8.775 in., flange outer diameter 13.00 in., and IBS to mounting face 1.19 in. The hub carries a 10-stud wheel pattern on an 11.25 in. bolt circle, with stud hole diameter .904/.906 in. An ABS tone ring (ring number 3237H1256) is included, with an ABS pilot diameter of 6.882/6.879 in. Drive flange uses an 8-stud pattern on a 7.00 in. bolt circle with 5/8-11 UNC-3B thread. Available from Pro Gear and Transmission. Call us to confirm fit for your specific axle configuration.
Features
R-series drive axle application, conventional hub-only (not fully dressed)
GAWR: 27,000 lb
10-stud wheel pattern, 11.25 in. bolt circle, stud hole .904/.906 in.
Wheel pilot diameter 8.653/8.646 in.; drum pilot diameter 8.778/8.775 in.; flange outer diameter 13.00 in.
ABS tone ring included, ABS ring number 3237H1256, ABS pilot diameter 6.882/6.879 in.
Outboard drum brake position; drive flange: 8-stud, 7.00 in. bolt circle, 5/8-11 UNC-3B thread
Tech Specs
- Axle Series: R
- Axle Application: Drive
- Hub Type: Hub only
- Hub Style: Conventional
- Fully Dressed: No
- GAWR: 27,000 lb
- Brake Type: Drum
- Drum Position: Outboard
- Tone Ring: Yes
- ABS Ring Number: 3237H1256
- ABS Pilot Diameter: 6.882/6.879 in.
- Wheel Stud Pattern: 10-stud
- Wheel Stud Bolt Circle Diameter: 11.25 in.
- Wheel Stud Hole Diameter: .904/.906 in.
- Wheel Pilot Diameter: 8.653/8.646 in.
- Drum Bolt Pattern: 10-stud
- Drum Bolt Circle Diameter: 11.25 in.
- Drum Bolt Size: .904/.906 in.
- Drum Pilot Diameter: 8.778/8.775 in.
- Flange Outer Diameter: 13.00 in.
- Drive Stud Pattern: 8-stud
- Drive Stud Bolt Circle Diameter: 7.00 in.
- Drive Stud Thread: 5/8-11 UNC-3B
- Drive Flange Stud P/N: 08-008551
- Wheel Stud P/N: 09-002003
- Inner Bearing Surface (IBS) to Mounting Face: 1.19 in.
- IBS to Outer Surface: 7.77/7.73 in.
- IBS to Outer Bearing Surface (OBS): 4.327/4.287 in.
- Outer Cone: 580
- Outer Cup: 572
- Inner Cone: 594A
- Inner Cup: 592A
- Oil Seal: A1205Q2487
- Base Part Number: 16062
- VMRS Code: 018-002-001
