The 17XTC040B462DOD Meritor coupling driveshaft DOD (Disconnect on Demand) assembly uses a 1710 series half round U-joint and measures 56.5 in. overall, with 46.2 in. of tubing and a 7.62 in. center bearing mount. It is a not in-phase assembly: the centerline of the weld yoke crossbore is phased 90 degrees from the centerline of the coupling yoke. A driveshaft like this carries rotating power through its universal joints while the axle moves with the suspension. Early joint wear often starts as a squeak, and excess clearance can show up as a clunk when the shifter moves between drive and reverse. A genuine Meritor part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Non returnable item
Features
Coupling driveshaft assembly with Disconnect on Demand (DOD)
1710 series half round U-joint
Overall length 56.5 in., tubing length 46.2 in.
Center bearing mount 7.62 in.
Not in-phase: weld yoke crossbore centerline phased 90 degrees from the coupling yoke centerline
Tech Specs
- Phased: Not In-Phase
- Tubing Length: 46.2 in.
- Center Bearing Mount: 7.62 in.
- Overall Length: 56.5 in.
- U-Joint Type: Half Round
- U-Joint Series: 1710
- Phased Notes: The centerline of crossbore of weld yoke to be phased 90 deg. from the centerline of the coupling yoke.
- Assembly Type: Coupling Assembly
