Meritor 18XTC014B323DOD is a coupling driveshaft assembly for Disconnect on Demand (DOD) use, 43.91 inches long overall with 32.3 inches of tubing. It runs a 1810 series half round U-joint and has a center bearing mount of 8.62 inches. The weld yoke crossbore is phased 90 degrees from the centerline of the coupling yoke, so the assembly is not in-phase and must be installed with that offset in mind. A driveshaft like this carries torque along the driveline, with a yoke at each end tying it to the parts it joins. It is a genuine Meritor part from Pro Gear and Transmission.
Non returnable item
Features
Coupling driveshaft assembly for DOD (Disconnect on Demand)
1810 series half round U-joint
43.91 in. overall length with 32.3 in. tubing length
8.62 in. center bearing mount
Weld yoke crossbore phased 90 degrees from the coupling yoke centerline, not in-phase
Tech Specs
- U-Joint Series: 1810
- Phased Notes: The centerline of crossbore of weld yoke to be phased 90 deg. from the centerline of the coupling yoke.
- U-Joint Type: Half Round
- Phased: Not In-Phase
- Assembly Type: Coupling Assembly
- Tubing Length: 32.3 in.
- Overall Length: 43.91 in.
- Center Bearing Mount: 8.62 in.
