Meritor 25RHS029C518DOD is a slip driveshaft on demand assembly on the 25RPL U-joint series, from the Meritor Genuine Drivetrain on Demand Driveshafts line. It is the long one in the family at 68.2 in. overall, with 51.8 in. of tubing and an 11.28 in. slip length. It is not in-phase: the weld yoke crossbore centerline is phased 90 deg. from the slip yoke centerline.
A driveshaft assembly carries torque and rotation along the driveline while allowing for movement and shifts in alignment. Vibration in the seat that rises with driveline speed calls for an inspection, and long stretches at incorrect operating angles wear the slip splines and universal joints.
A genuine Meritor part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Slip driveshaft on demand assembly, 25RPL U-joint series
Overall length 68.2 in., tubing length 51.8 in.
Slip length 11.28 in., slip assembly type
Not in-phase: weld yoke crossbore phased 90 deg. from the slip yoke centerline
Genuine Meritor part from the Drivetrain on Demand Driveshafts line
Seat vibration that climbs with driveline speed is an early cue to inspect the shaft
Tech Specs
- Brand: Meritor Genuine
- U-joint series: 25RPL
- Assembly type: Slip assembly
- Overall length: 68.2 in.
- Tubing length: 51.8 in.
- Slip length: 11.28 in.
- Phasing: Not in-phase
- Phasing note: weld yoke crossbore centerline phased 90 deg. from the slip yoke centerline
- Unit pack: 1
- UPC: 193174170119
