The Meritor 176N4-1041X or 176N41041X is a genuine Meritor end yoke in the 176N Series driveline family. It features a 46-spline bore with a 2.390 in. spline diameter and 2.32 in. spline length, a 3.25 in. hub diameter, and a yoke dimension of 7.00 in. across the ears. Bearing cap diameter is 1.94 in., center-to-end measurement is 5.06 in., and the joint angle is rated at 34 degrees. Counter bore depth is 0.14 in. This yoke pairs with U-joint kit M407X and deflector DEFR56-7. Call us to confirm proper fit for your driveline application.
Interchanges:
- 8235176N41041X
- 85102728
- HR176N41041X
- TDA176N41041X
- Dana 6341041X
- Neapco N6341041X
Features
176N Series end yoke, part number 176N4-1041X or 176N41041X
46-spline bore, 2.390 in. spline diameter, 2.32 in. spline length
7.00 in. dimension across ears, 3.94 in. hub diameter
Center-to-end: 5.06 in. | Joint angle: 34 degrees
Bearing cap diameter: 1.94 in. | Counter bore depth: 0.14 in.
Use with U-joint kit M407X and deflector DEFR56-7
Tech Specs
- Series: 176N
- Number of Splines: 46
- Spline Diameter: 2.390 in.
- Spline Length: 2.32 in.
- Hub Diameter: 3.25 in.
- Yoke Dimension Across Ears: 7.00 in.
- Bearing Cap Diameter: 1.94 in.
- Center to End: 5.06 in.
- Joint Angle: 34 degrees
- Counter Bore Depth: 0.14 in.
- Compatible U-Joint Kit: M407X
- Compatible Deflector: DEFR56-7
- VMRS Code: 024-001-003
