Meritor 18N series ES end yoke, part number 18N4-2711-1X or 18N427111X, is a heavy-duty driveline component built to the following verified specifications: 46 splines on a 2.390 in. spline diameter, 2.63 in. spline length, and a 3.25 in. hub diameter. Center-to-end measures 5.54 in. with a distance between nibs of 7.63 in. The bearing cap diameter is 1.94 in., and the yoke accommodates a 34-degree joint angle. Compatible U-joint kit is R676X; use kit KT17SB for installation. Mounting holes are through-hole style (TH), and the deflector reference is DEFR54-1. Per the manufacturer comment, this yoke uses a Dana spline spec of 2.374 in. with 46 splines. A genuine Meritor part sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
18N series ES end yoke, part number 18N4-2711-1X or 18N427111X
46 splines, 2.390 in. spline diameter, 2.63 in. spline length
3.25 in. hub diameter, 1.94 in. bearing cap diameter
Center-to-end: 5.54 in.; distance between nibs: 7.63 in.
34-degree joint angle; through-hole kit mounting (TH)
Use with U-joint kit R676X and installation kit KT17SB; deflector DEFR54-1
Tech Specs
- Series: 18N
- Marketing Group: 18N Series
- Number of Splines: 46
- Spline Diameter: 2.390 in.
- Spline Length: 2.63 in.
- Hub Diameter: 3.25 in.
- Bearing Cap Diameter: 1.94 in.
- Center To End: 5.54 in.
- Distance Between Nibs: 7.63 in.
- Joint Angle: 34 degrees
- Kit Mounting Holes: Through-hole (TH)
- Use U-Joint Kit: R676X
- Use Kit: KT17SB
- Deflector: DEFR54-1
- Dana Spline Reference: 2.374 in., 46 splines
- VMRS Code: 024-001-003
