The Meritor R202030 Fastset is a no-ream king pin kit for steer axles. Its spiral bushings seat without a follow-up reaming pass, so a king pin job needs fewer special tools and less shop time. The double draw key king pin measures 1.999 in. in diameter and 11.212 in. long, and the bearing is 2.072 in. inside diameter, 3.823 in. outside diameter and 1.121 in. wide. A groove pattern on the pin carries grease out to the high-wear surfaces. The kit is listed for Meritor MFS16, MFS18 and MFS20 axles. A genuine Meritor part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
No-ream Fastset design with spiral bushings
Double draw key king pin, 1.999 in. diameter, 11.212 in. long
Bearing 2.072 in. inside diameter, 3.823 in. outside diameter, 1.121 in. wide
Listed for Meritor MFS16, MFS18 and MFS20 axles
Groove pattern on the pin carries grease to high-wear surfaces
Seats without reamers, so installation takes fewer special tools
Tech Specs
- King pin type: Double draw key
- King pin diameter: 1.999 in.
- King pin length: 11.212 in.
- Bushing type: Spiral (no-ream)
- Bearing inside diameter: 2.072 in.
- Bearing outside diameter: 3.823 in.
- Bearing width: 1.121 in.
- Axle make: Meritor
- Axle models: MFS16, MFS18, MFS20
