Meritor 16TYSB3424A or 16TYSB34-24A flange yoke, listed by the manufacturer as an 18N end yoke, half round. It has a 7.25 in. bolt circle with 0.38 in. threaded bolt holes at 24 threads per inch, a 6.435 in. pilot diameter, and a 2.14 in. spline with 41 splines. It measures 5.31 in. across the ears and takes 1.875 in. bearing caps. A yoke of this kind sits at the end of a driveshaft, carries the universal joint and passes torque through it while letting the joint work through changes in driveline angle. Wear or distortion lets the joint run off center, which usually shows up as driveline vibration. A genuine Meritor part from Pro Gear and Transmission. Call us to confirm fit for your application.
Features
Meritor flange yoke 16TYSB3424A or 16TYSB34-24A, 18N half round style
7.25 in. bolt circle with 0.38 in. threaded bolt holes at 24 threads per inch
6.435 in. pilot diameter, 3.00 in. hub diameter, 6.457 in. center to end
2.14 in. spline diameter with 41 splines and a 2.179 in. bore length
1.875 in. bearing cap diameter, 5.31 in. across the ears
Carries the universal joint at the driveshaft end and passes torque through it
Tech Specs
- Bolt circle diameter: 7.25 in.
- Bolt hole diameter: 0.38 in.
- Bolt holes: threaded, 24 threads per inch
- Pilot diameter: 6.435 in.
- Spline diameter: 2.14 in.
- Number of splines: 41
- Yoke dimension across ears: 5.31 in.
- Center to end: 6.457 in.
- Bore length: 2.179 in.
- Hub diameter: 3.00 in.
- Outboard pilot mounting surface: 4.397 in.
- Bearing cap diameter: 1.875 in.
