Meritor 0515946002 is a conventional hub for the FC-941 axle series, steer axle application, base part number 15946, supplied hub only (not fully dressed) with no tone ring. The flange carries wheel stud pattern 08 on a 10.827 in. bolt circle and disc bolt pattern 10 on a 7.25 in. circle with 9/16-12 UNC-2B bolts, and the flange outer diameter is 12.62 in. Brake type is Quadraulic. A worn or damaged hub shows up as noise, vibration or uneven wheel rotation, and a cracked or warped flange points to damage or excess heat at the wheel end. A genuine Meritor part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
FC-941 axle series, steer axle application, base part number 15946
Conventional hub style, hub only (not fully dressed), no tone ring
Wheel stud pattern 08 on a 10.827 in. bolt circle, flange outer diameter 12.62 in.
Disc bolt pattern 10 on a 7.25 in. circle, 9/16-12 UNC-2B bolts, Quadraulic brake type
Hub cap pattern 04 on a 3.625 in. bolt circle, 5/16-18 UNC-3B thread
Noise, vibration or uneven rotation at the wheel end are signs to inspect the hub
Tech Specs
- Axle Series:FC-941
- Axle Application:Steer
- Fully Dressed:No
- Hub Type:Hub only
- Hub Style:Conventional
- Tone Ring:N
- Base Part Number:15946
- Oil Seal:A1205F2554
- Wheel Stud Hole:.904/.906 in.
- IBS to OBS:2.94/2.90 in.
- Outer Cup:25820
- Inner Cup:JM207010
- Inner Cone:JM207049A
- Outer Cone:25877
- Hub Cap Bolt Thread:5/16-18 UNC-3B
- Hub Cap Bolt Circle Diameter:3.625 in.
- IBS to Outer Surface:4.38/4.34 in.
- Wheel Stud Bolt Circle Diameter:10.827 in.
- Hub Cap Pattern:04
- GAWR (lb):9000
- Inner Bearing Surface (IBS) to Mounting Face:6.07 in.
- Wheel Stud Pattern:08
- Disc Bolt Pattern:10
- Brake Type:Quadraulic
- Disc Bolt Circle Diameter:7.25 in.
- Disc Bolt Size:9/16-12 UNC-2B
- Notes:0515946002A_Notes
- VMRS Code:018-001-003
- Flange Outer Diameter:12.62 in.
- Rotor Pilot Diameter:6.00/5.997 in.
- Wheel Pilot Diameter:8.685/8.693 in.
- Wheel Stud:09-002013
