The Meritor 18XTS069B251DOD slip driveshaft is a DOD (Disconnect on Demand) assembly with half round U-joints in the 1810 series. It measures 40.27 in. overall, with 25.1 in. of tubing and a 10.25 in. slip length. The assembly is not in-phase: the weld yoke crossbore centerline is set 90 degrees from the slip yoke centerline, so keep that phasing when you install it. A driveshaft assembly carries torque between drivetrain components, using universal joints at each end so the shaft can run at an angle. A genuine Meritor part from Pro Gear and Transmission.
Non returnable item
Features
Slip driveshaft DOD (Disconnect on Demand) assembly
Half round U-joints, 1810 U-joint series
Overall length 40.27 in., tubing length 25.1 in., slip length 10.25 in.
Not in-phase: weld yoke crossbore centerline phased 90 degrees from the slip yoke centerline
Carries torque between drivetrain components through universal joints
Tech Specs
- U-Joint Type: Half Round
- Assembly Type: Slip Assembly
- Phased Notes: The centerline of crossbore of weld yoke to be phased 90 deg. from the centerline of the slip yoke
- Tubing Length: 25.1 in.
- U-Joint Series: 1810
- Phased: Not In-Phase
- Slip Length: 10.25 in.
- Overall Length: 40.27 in.
