Meritor R230105 tie rod end for the front steer axle, a genuine Meritor part from Pro Gear and Transmission. It is a roadside-style end with a left-hand rod thread (1.875 in. diameter, 12 threads per inch) and a 0.875 in. stud thread at 14 threads per inch. Stud center to rod end measures 12.688 in., and lubrication fittings come installed. In the steering linkage, the tie rod end is the pivoting joint that passes steering input out to the wheel. Slack in a worn joint shows up as loose or wandering steering, a clunk over bumps or in tight turns, and uneven wear on the steer tires. Call us to confirm proper fit.
Features
Left-hand rod thread, 1.875 in. diameter, 12 threads per inch
Stud thread 0.875 in. diameter, 14 threads per inch
Taper diameters 1.25 in. large and 1.08 in. small, taper length 1.36 in.
Stud center to rod end 12.688 in., lubrication fittings installed
Used in Meritor end and tie rod assemblies A13102U4233, B13102U4233, B13102P4566, B13102D4268, B13102K4457 and B33102K4457
Worn ends show up as loose steering, clunking and uneven steer tire wear
Tech Specs
- Axle: Front (steer)
- Style: Roadside
- Rod thread direction: Left hand
- Rod thread diameter: 1.875 in.
- Rod threads per inch: 12
- Stud thread diameter: 0.875 in.
- Stud threads per inch: 14
- Large taper diameter: 1.25 in.
- Small taper diameter: 1.08 in.
- Taper length: 1.36 in.
- Stud center to rod end: 12.688 in.
- Lubrication fittings: Installed
