The Meritor E-6039 or E6039 is a u-joint puller built for most Dana Spicer and Meritor u-joints. It is designed to run on a 1/2 in. air impact wrench, and it can be used at different angles and in tight places, so you are not limited to a clear shot at the joint. Holes in the puller legs store the bolts, and the set comes with bolts for several thread sizes.
A puller of this kind lets a technician draw driveline u-joint bearing cups out and set new ones without heating the yoke or hammering on it. The threaded shaft supplies the pulling force that frees a joint that has seized. A genuine Meritor tool from Pro Gear and Transmission.
Features
Puller for most Dana Spicer and Meritor u-joints
Designed for use with a 1/2 in. air impact wrench
Can be used at different angles and in tight places
Holes in the puller legs store the bolts
Bolts included: (2) 5/16 in.-24 x 1-1/2 in.; (2) 3/8 in.-24 x 1-1/2 in.; (2) 7/16 in-20 x 1-1/2 in.; (2) M8 x 1.25mm x 35mm
Pulls u-joint cups without heat or hammering
Tech Specs
- Tool Type:Puller
- Includes:Bolts included are: (2) 5/16 in.-24 x 1-1/2 in.; (2) 3/8 in.-24 x 1-1/2 in.; (2) 7/16 in-20 x 1-1/2 in.; (2) M8 x 1.25mm x 35mm
- Application:Most Dana Spicer and Meritor U-joints
- Tool Information:U-joint puller designed for use with a 1/2 in. air impact wrench. Can be used at different angles and in tight places. Holes in the puller legs store bolts.
