5WCSC454 is a Meritor driveline flange yoke with a splined hole of 54 splines, a 2.85 in. spline diameter and a 3.14 in. spline length. The flange measures 7.08 in. outside diameter on a 5.9055 in. bolt circle with 0.59 in. bolt holes, and the pilot diameter is 4.264 in. As the connection point where the driveshaft meets its mating flange, the yoke keeps the driveline aligned, which cuts vibration and eases the load on the U-joints. A worn, cracked or corroded yoke shows up as vibration, noise or looseness at the joint. A genuine Meritor part from Pro Gear and Transmission.
Features
Splined hole with 54 splines, 2.85 in. spline diameter, 3.14 in. spline length
Flange outside diameter 7.08 in. on a 5.9055 in. bolt circle
Bolt hole diameter 0.59 in. and pilot diameter 4.264 in.
Hub diameter 3.285 in. and face to end 3.93 in.
Connects the driveshaft to its mating flange and helps hold driveline alignment
A genuine Meritor driveline part
Tech Specs
- Marketing group: Splined Hole
- Number of splines: 54
- Spline diameter: 2.85 in.
- Spline length: 3.14 in.
- Flange outside diameter: 7.08 in.
- Bolt circle diameter: 5.9055 in.
- Bolt hole diameter: 0.59 in.
- Pilot diameter: 4.264 in.
- Hub diameter: 3.285 in.
- Face to end: 3.93 in.
