Meritor AxleTech 82NYS38-31A or 82NYS3831A spline yoke from the 82N Series, with 46 splines on a 2.390 in. spline diameter and a 2.32 in. spline length. The hub diameter is 3.25 in., the pilot diameter is 8.13 in. and face to end measures 4.25 in. Kit mounting holes are threaded, and the yoke takes CP82N-DWT, CP82N-HB, CP82N-HWD or PERMALUBE U-joint kits with a DEFR56-7 deflector. A yoke like this is the splined coupling point between a driveline shaft and the axle or transmission, passing torque through its splines, and accurate machining and balance help keep vibration down. It is used in Meritor differential carrier assemblies, including A263200E2137538 (standard), A273200E2137538 (no-spin) and A363200F2138538 (lockout). A genuine Meritor AxleTech part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Non returnable item
Features
82N Series yoke with 46 splines
Spline diameter 2.390 in., spline length 2.32 in.
Hub diameter 3.25 in., pilot diameter 8.13 in.
Face to end 4.25 in., counter bore depth 0.14 in., slot width 0.63 in.
Threaded kit mounting holes, uses a DEFR56-7 deflector
Splined coupling point for a driveline shaft, passing torque to or from the axle or transmission
Tech Specs
- Marketing Group: 82N Series
- Series: 82N
- Number of Splines: 46I
- Spline Diameter: 2.390 in.
- Spline Length: 2.32 in.
- Hub Diameter: 3.25 in.
- Pilot Diameter: 8.13 in.
- Face To End: 4.25 in.
- Counter Bore Depth: 0.14 in.
- Slot Width: 0.63 in.
- Use U-Joint Kit: CP82N-DWT, CP82N-HB, CP82N-HWD, or PERMALUBE
- Kit Mounting Holes, Drilled Or Threaded: TH
- Deflector: DEFR56-7
- VMRS Code: 024-001-003
