16TYS28-13A or 16TYS2813A is a genuine Meritor end yoke from the 16N series. It has a 1.790 in. spline diameter, a 2.25 in. spline length, a 2.50 in. hub diameter and a 28 degree joint angle, with 4.88 in. from center to end and 5.31 in. between nibbs. The 1.88 in. bearing cap diameter pairs with the M674X U-joint kit. A yoke like this ties the driveshaft to the pinion gear, carries drive torque and holds the driveline in alignment. Our parts manual lists it as an Easy Service (strap) type yoke for the Meritor 140/141/143/144/145 Series, RD-20-145 and RT-40-145 drive axles. Call us to confirm proper fit for your application.
Features
Genuine Meritor end yoke, 16N series
Spline diameter 1.790 in., spline length 2.25 in., hub diameter 2.50 in.
Center to end 4.88 in., distance between nibbs 5.31 in., joint angle 28 degrees
Bearing cap diameter 1.88 in., uses the M674X U-joint kit
Listed as an Easy Service (strap) type yoke in the Meritor 140/141/143/144/145 Series, RD-20-145 and RT-40-145 drive axles
Links the driveshaft to the pinion gear and carries drive torque
Tech Specs
- Series: 16N
- Spline diameter: 1.790 in.
- Spline length: 2.25 in.
- Hub diameter: 2.50 in.
- Center to end: 4.88 in.
- Joint angle: 28 degrees
- Distance between nibbs: 5.31 in.
- Bearing cap diameter: 1.88 in.
- U-joint kit: M674X
