EL13053X Midland Haldex Air Compressor - Detroit Diesel 60-Series Thru-Drive

The Midland Haldex EL13053X is an air compressor built for Detroit Diesel 60-Series engines in a Thru-Drive, 0° tilt configuration. Head rotation is right; block rotation is left. The unit displaces 13.0 CFM at 1250 RPM with a 2.75 in. bore diameter and 1.50 in. stroke. Overall dimensions are 12.00 in. height, 6.84 in. width, and 10.45 in. length, with a 0.19 in. external shaft length. It features flange mount, gear drive, water cooling, end cap oil feed, and internal oil drain at the flange. The head is rotatable, and the discharge type is top/threaded. OEM equivalent to NT7005AK. Call us to confirm proper fit for your application.

A refundable core charge of $210.00 applies to this item and will be collected at checkout. The core charge is refunded upon receipt of your returned core, subject to its condition; customer is responsible for return shipping. Call us at (877) 776-4600 for details.

A factory handling fee of $25.00 per unit is added at checkout.

Features

Detroit Diesel 60-Series Thru-Drive application, 0 degree tilt
Rated displacement: 13.0 CFM at 1250 RPM
Bore diameter: 2.75 in., stroke: 1.50 in.
Overall dimensions: 12.00 in. H x 6.84 in. W x 10.45 in. L
Rotatable head; flange mount, gear drive
Water cooled; top/threaded discharge; internal oil drain at flange
OEM equivalent NT7005AK; high-capacity replacement for EL16053X

Tech Specs

• Head Rotation: Right
• Block Rotation: Left
• Application: Detroit Diesel 60-Series, Thru-Drive, 0 degree tilt
• OEM Part Number: NT7005AK (exact replacement)
• High Capacity Replacement For: EL16053X
• Core Group: 1353
• Overall Height: 12.00 in.
• Overall Width: 6.84 in.
• Overall Length: 10.45 in.
• External Shaft Length: 0.19 in.
• Bore Diameter: 2.75 in.
• Stroke: 1.50 in.
• Rated Displacement: 13.0 CFM at 1250 RPM
• Mount Type: Flange Mount, Gear Drive
• Discharge Type: Top/Threaded
• Oil Feed: End Cap
• Oil Drain: Internal at Flange
• Cooling: Water Cooled
• Head: Rotatable

Additional Information

Orientation is viewed from the front of the unit.
Installation/Changeover Instructions: refer to document L31106.
Service units are supplied without governors or manifolds and may require head rotation and end cap rotation prior to installation or changeover.
Thru-drive units must not exceed 65 ft. lbs. of transmitted torque.
Torque nut to 220-255 ft. lbs. during installation.