The Midland Haldex EL13050X is a 1300-series air compressor designed for Detroit Diesel 0° tilt engines. It delivers a rated displacement of 13.0 CFM at 1250 RPM through a flange mount, gear drive configuration with a 2.75 in. bore diameter and 1.50 in. stroke. The head and block both rotate right. This unit features a top/flange discharge, end cap oil feed, internal oil drain at the flange, and water cooling. Overall dimensions are 12.00 in. tall, 6.84 in. wide, and 10.45 in. long, with an external shaft length of 0.19 in. Part EL13050X is a direct substitution for KN7070X and KN7080X; head rotation is required when substituting for KN7080X. OEM part number N7005H. Call us to confirm proper fit for your application.
Changeover/Installation Instructions: Refer to instruction sheet L31028 (covering EL13050 and EL16050 series).
Service units are supplied without governors or manifolds and may require head rotation and end cap rotation before installation or changeover. Service and remanufactured units have a 1 in. oil drain port with no threads.
Thru-drive units must not exceed 65 ft. lbs. of transmitted torque. Torque nut to 80-100 ft. lbs. Installation gaskets are included.
Cross-references: GK13050, GK13050C, HK1300, KN17090X, P1300/000, P1300/010, P1300/020, P1300/030, RB1300/000, RB1300/010, RB1300/020, RB1300/030, RK1316/000, RK1316/010, RK1316/020, RK1316/030, UK1300.
A refundable core charge of $210.00 applies to this item and will be collected at checkout. The core charge is refunded upon receipt of your returned core, subject to its condition; customer is responsible for return shipping. Call us at (877) 776-4600 for details.
Features
Application: Detroit Diesel 0° tilt engines
Rated Displacement: 13.0 CFM @ 1250 RPM
Bore Diameter: 2.75 in., Stroke: 1.50 in.
Flange mount, gear drive with top/flange discharge
Water cooled; end cap oil feed; internal oil drain at flange
Substitution for KN7070X and KN7080X (head rotation required for KN7080X)
Tech Specs
- Head Rotation: Right
- Block Rotation: Right
- Application: Detroit Diesel 0° Tilt Engines
- OEM Part Number: N7005H
- Core Group: 1300
- Rated Displacement: 13.0 CFM @ 1250 RPM
- Bore Diameter: 2.75 in.
- Stroke: 1.50 in.
- Overall Height: 12.00 in.
- Overall Width: 6.84 in.
- Overall Length: 10.45 in.
- External Shaft Length: 0.19 in.
- Mount Type: Flange Mount
- Drive Type: Gear Drive
- Discharge Type: Top/Flange
- Oil Feed: End Cap
- Oil Drain: Internal at Flange
- Cooling: Water Cooled
- Substitutes For: KN7070X, KN7080X (head rotation required for KN7080X)
Additional Information
Orientation viewed from front. Head and block both rotate right as supplied.Changeover/Installation Instructions: Refer to instruction sheet L31028 (covering EL13050 and EL16050 series).
Service units are supplied without governors or manifolds and may require head rotation and end cap rotation before installation or changeover. Service and remanufactured units have a 1 in. oil drain port with no threads.
Thru-drive units must not exceed 65 ft. lbs. of transmitted torque. Torque nut to 80-100 ft. lbs. Installation gaskets are included.
Cross-references: GK13050, GK13050C, HK1300, KN17090X, P1300/000, P1300/010, P1300/020, P1300/030, RB1300/000, RB1300/010, RB1300/020, RB1300/030, RK1316/000, RK1316/010, RK1316/020, RK1316/030, UK1300.
