The Midland Haldex 40010163 adjuster kit is an automatic slack adjuster service kit with a 1-1/2 in. spline diameter, 28 splines and a 5-1/2 in. arm. The arm has a 34° body angle, a 5/8 in. offset and a 5/8 in. arm hole, and the anchor bracket is the strap style. A slack adjuster turns the straight push of the brake chamber into rotation at the camshaft, and an automatic one takes up lining and drum wear on its own so brake travel stays in check. If pushrod travel keeps growing, make sure the adjuster moves freely and returns fully. A genuine Midland Haldex part from Pro Gear and Transmission.
A factory handling fee of $25.00 per order is added at checkout.
Features
ABA service kit for an automatic slack adjuster
Spline diameter and count: 1-1/2 in., 28 splines
Arm length 5-1/2 in., arm hole diameter 5/8 in., offset 5/8 in.
Body angle 34°, strap-style anchor bracket
Grease fitting at 180° location, 90° type
Opposite-side kit: 400-10164
Tech Specs
- Spline Diameter-Spline Count: 1-1/2"-28
- Arm Length: 5-1/2"
- Body Angle: 34°
- Offset: 5/8"
- Arm Hole Diameter: 5/8"
- Bracket Number: 42710430
- Anchor Bracket Style: Strap
- OEM Part Number: 409-10523
- Grease Fitting Location: 180°
- Grease Fitting Type: 90°
