48TK4985 Muncie SS66 Manual Air Activation Kit

The Muncie 48TK4985 is the Manual Air activation kit for the SS66 Series split shaft power take-off, designated as the A-Option in Muncie's SS66 service documentation. This kit includes activation kit 48M61261A. The SS66 is a split shaft PTO designed to provide two 6-bolt PTO apertures where the main transmission has none, or where space limits access to a second transmission opening. It uses the main vehicle driveshaft as its input and is typically applied on chassis up to Class 5. Engagement on this configuration is via manual air shift. Call us to confirm this kit fits your specific SS66 configuration before ordering.

Features

SS66 Series Manual Air activation kit, designated A-Option in Muncie service documentation
Includes activation kit 48M61261A
Designed for the SS66 split shaft PTO, which provides two 6-bolt PTO apertures
Engagement via manual air shift
SS66 Series accepts common PTO series such as the TG or CS6 at each 6-bolt opening
Applies to chassis configurations typically up to Class 5

Additional Information

The Muncie SS66 Series split shaft PTO uses the main vehicle driveshaft as its input and provides two 6-bolt PTO apertures for auxiliary power equipment. When the SS66 is engaged, the main driveshaft is disconnected from the rear axle. The SS66 can also be mounted behind a single PTO to offer multiple PTO output options. Through-shaft flanges are Spicer 1410 and 1500/1510 Series. Maximum through-shaft torque for the SS66 Series is 2,900 lb-ft. Part 48TK4985 is the A-Option activation kit for Manual Air engagement as referenced in Muncie service manual SP17-02_Split_Shaft_PTO_Ser_Manual.pdf.