The Muncie A30-A1006-MX5CBPW (also shown as A30A1006MX5CBPW) is an Allison 10-bolt constant drive power takeoff designed for 3000 and 4000 Series Allison transmissions. This PTO mounts using extended-length fasteners across three available housing arrangements, giving installers flexibility when clearance is tight. A rotatable pump flange simplifies alignment during installation. Tapered roller bearings support the output shaft, and an increased output shaft diameter adds durability under sustained drive loads. The gear set is designed to reduce operating noise, and a single intermittent/continuous torque rating simplifies spec comparison. Reduced leak paths and compatibility with the EX Drive shaft extension round out the design. Call us to confirm the correct housing arrangement and ratio for your application.
Features
Allison 10-bolt constant drive mounting
Rotatable pump flange for easier pump alignment during installation
Tapered roller bearings for extended PTO service life
Increased output shaft diameter for higher durability under sustained drive
Three housing arrangements to suit different installation configurations
Compatible with EX Drive shaft extension
Tech Specs
Additional Information
| SPEED | 3000 SERIES | 4000 SERIES | INTERMITTENT CONTINUOUS HP (KW) | INTERMITTENT/CONTINOUS |
| RATIO | ENGINE % | ENGINE % | @ 1,000 RPM | TORQUE LBS.FT. (NM) |
| 5 | 74% | 105% | 77 (57) | 400 (542) |
| 6 | 85% | 122% | 77 (57) | 400 (542) |
| 7 | 99% | 141% | 79 (59) | 415 (563) |
| 8 | 114% | 163% | 69 (51) | 360 (488) |
| 9 | 122% | 175% | 65 (48) | 340 (461) |
| 10 | 131% | 187% | 59 (44) | 310 (420) |
| 11 | 151% | 215% | 52 (39) | 275 (373) |
| 12 | 162% | 231% | 50 (37) | 265 (359) |
| 15 | 201% | 287% | 39 (29) | 205 (278) |
