The Muncie A30-A1008-MX5BSPX or A30A1008MX5BSPX is a 10-bolt Allison-mount constant drive power take-off from Muncie's A30 Series. It mounts on Allison 3000 and 4000 Series transmissions and delivers constant-drive operation, meaning the PTO runs whenever the transmission is in gear. Tapered roller bearings extend service life over standard ball-bearing designs, and the increased-diameter output shaft handles higher torque demands. The rotatable pump flange lets you clock the output to fit tight installations, and the design carries a single intermittent/continuous torque rating, simplifying application selection. Three housing arrangements are available within the A30 Series, and the unit is compatible with Muncie's EX Drive shaft extension. Call us to confirm the correct housing arrangement and output configuration for your specific installation.
Features
10-bolt mount for Allison 3000 and 4000 Series transmissions
Constant drive engagement - PTO runs with transmission in gear
Rotatable pump flange for flexible output clocking during installation
Tapered roller bearings for extended PTO service life
Increased output shaft diameter for higher torque capacity
Compatible with Muncie EX Drive shaft extension
Tech Specs
Additional Information
| SPEED | 3000 SERIES | 4000 SERIES | INTERMITTENT CONTINUOUS HP (KW) | INTERMITTENT/CONTINOUS |
| RATIO | ENGINE % | ENGINE % | @ 1,000 RPM | TORQUE LBS.FT. (NM) |
| 5 | 74% | 105% | 77 (57) | 400 (542) |
| 6 | 85% | 122% | 77 (57) | 400 (542) |
| 7 | 99% | 141% | 79 (59) | 415 (563) |
| 8 | 114% | 163% | 69 (51) | 360 (488) |
| 9 | 122% | 175% | 65 (48) | 340 (461) |
| 10 | 131% | 187% | 59 (44) | 310 (420) |
| 11 | 151% | 215% | 52 (39) | 275 (373) |
| 12 | 162% | 231% | 50 (37) | 265 (359) |
| 15 | 201% | 287% | 39 (29) | 205 (278) |
