The Muncie F20-F1312-DS5TNPX power takeoff is a Ford 10-Speed Model PTO built for Ford Super Duty trucks from F-250 through F-600 running the Ford 10R140 transmission. It is solenoid activated and uses a pre-configured wiring harness for a straightforward electrical hookup. The F20 series carries patent-pending noise abatement technology, and this unit is offered in direct mount and round shaft output configurations. With the internal speed ratio code 12, the PTO turns at roughly 130% of engine speed and is rated for 50 intermittent HP and 261 lbs.ft. intermittent torque at 1,000 RPM. A genuine Muncie part from Pro Gear and Transmission.
Features
Fits Ford Super Duty F-250 through F-600 with the Ford 10R140 transmission
Solenoid activated engagement
Pre-configured wiring harness
Patent-pending noise abatement technology
Offered with direct mount and round shaft output options
Internal speed ratio code 12: about 130% of engine speed, 50 intermittent HP and 261 lbs.ft. intermittent torque at 1,000 RPM
Tech Specs
- Internal speed ratio code: 12
- Percent of engine speed: 130%
- Intermittent HP at 1,000 RPM: 50
- Intermittent torque at 1,000 RPM: 261 lbs.ft. (354 Nm)
- Activation: solenoid activated
- Wiring: pre-configured harness
- Output options: direct mount and round shaft
- Application: Ford Super Duty F-250 to F-600 with Ford 10R140 transmission
Additional Information
|
Internal Speed Ratio Code |
% of Engine Speed | Intermittent HP @ 1,000 RPM | Intermittent Torque lbs.ft. |
|---|---|---|---|
| 12 | 130% | 50 (37) | 261 (354) |
