48TK5017 Muncie PTO Installation Kit CS10 CS20 12V Direct Activation Solenoid

The Muncie 48TK5017 is a 12-volt installation kit designed for the CS10 and CS20 power takeoff series. It includes the components needed to install the direct activation solenoid used on these PTO units. This kit is listed in Muncie's own service-parts documentation for the CS10, CS20, CS24, and CS25 PTO lines, covering both solenoid installation and associated hose hardware. The hose kit referenced alongside this installation kit is Muncie part number 43TK4036. A genuine Muncie part, available from Pro Gear and Transmission. Call us to confirm proper fit for your application.

Features

Muncie part number 48TK5017
12-volt direct activation solenoid installation kit
Designed for Muncie CS10 and CS20 PTO series
Also referenced in service documentation for CS24 and CS25 PTO units
Companion hose kit: Muncie 43TK4036
Sold as a single kit (each)

Tech Specs

• Part Number: 48TK5017
• Voltage: 12V
• Activation Type: Direct Activation Solenoid
• Application: Muncie CS10 and CS20 PTO Series
• Unit of Measure: Each
• Companion Hose Kit: 43TK4036

Additional Information

Muncie part number 48TK5017 is also cross-referenced as MU48TK5017, MN48TK5017, MUN48TK5017, 7753-48TK5017, and 775348TK5017. This installation kit is covered in Muncie service-parts document SP10-08 for the CS24 and CS25 PTO series in addition to the CS10 and CS20 applications. Installation instructions are found on page 7 of the applicable service manual; the companion hose kit (43TK4036) is covered on the same page. NMFC classification: 128520, Hydraulic PTOs, Pumps, Motors, etc.