The Muncie 828S-KIT10-D1CX or 828SKIT10D1CX is a heavy-duty 82 Series Power Take-Off built for high-torque hydraulic and mechanical drive applications. It uses a double-acting air shift for positive engagement and disengagement, and its cast iron housing is sized to handle up to 500 lb.ft. intermittent torque and 95 H.P. at 1,000 RPM at the top speed ratio. Seven direct-mount pump flange options cover SAE "B," "BB," "C," "D," and DIN 5462 mounts; rotatable flanges let you clock the pump for clearance. Two companion flange output types extend the unit to remote pump and mechanical drive setups. Eight speed ratios and nine output shaft options are available across the series. A genuine Muncie part from Pro Gear and Transmission. Call us to confirm the correct ratio and output configuration for your specific application.
Features
Double-acting air shift for positive engagement and disengagement
Cast iron housing rated up to 500 lb.ft. intermittent torque and 95 H.P. at 1,000 RPM
Seven direct-mount pump flange options: SAE "B," "BB," "C," "D," and DIN 5462
Rotatable direct-mount flanges allow pump positioning for maximum clearance
Two companion flange output types for remote pump and mechanical drives
Eight speed ratios and nine output shaft options available across the 82 Series
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 95 | 500 | 350 | (71) | (678) | (475) |
| 06 | 85 | 450 | 315 | (71) | (610) | (427) |
| 08 | 85 | 450 | 315 | (63) | (610) | (427) |
| 09 | 78 | 410 | 287 | (58) | (556) | (389) |
| 10 | 78 | 410 | 287 | (58) | (556) | (389) |
| 12 | 71 | 375 | 263 | (53) | (508) | (356) |
| 13 | 71 | 375 | 263 | (53) | (508) | (356) |
| 15 | 67 | 350 | 245 | (50) | (475) | (332) |
| 19 | 57 | 300 | 210 | (43) | (407) |
(285) |
