The Muncie CS41-A1007-H1IB (also referenced as CS41A1007H1IB) is a 10-bolt heavy-duty clutch shift power take-off from Muncie's CS41 Series. Designed for use on Allison 3000 and 4000 Series and Caterpillar CX transmissions, it supports both S.A.E. "C" and DIN 5462 direct mount configurations plus a 1410-series remote mount output shaft for remote pump drives. Direct mount flanges are rotatable, so the pump can be positioned for maximum clearance in tight installations. The unit runs standard pressure lubrication at no added cost and is rated to 4,000 RPM output on fire pump applications. Two assembly arrangements allow shaft-high or shaft-low mounting on either side of the transmission. A genuine Muncie part available from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
10-bolt heavy-duty clutch shift design for high-demand applications
Compatible with Allison 3000/4000 Series and Caterpillar CX transmissions
S.A.E. "C" and DIN 5462 direct mount flanges fit most high-power pump inputs
1410-series remote mount output shaft supports remote pump drive configurations
Rotatable direct mount flanges allow pump positioning for maximum clearance
Two assembly arrangements: shaft-high or shaft-low on either transmission side
Standard pressure lubrication included; maximum output speed of 4,000 RPM on fire pump applications
Tech Specs
Additional Information
| CS41 SERIES PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP @ 1000 RPM
|
Intermittent Torque (lb-ft)
|
Continuous Torque (lb-ft)
|
Intermittent (kW) @ 1000 RPM
|
Intermittent Torque (Nm)
|
Continuous Torque (Nm)
|
| 0.70 | 114 | 600 | 420 | 85 | 813 | 569 |
| 1.00 | 103 | 545 | 382 | 76 | 739 | 517 |
| 1.20 | 93 | 490 | 343 | 70 | 664 | 465 |
