The Muncie SH6B-U6807-E1IX or SH6BU6807E1IX is an SH Series power take-off built for high-torque applications. It uses an integral air-shift design with no exposed air cylinder, mounted in a 6-bolt cast iron housing. The SH Series was developed to bridge the gap between Muncie's TG and 82 Series PTOs. With 17 input gear sets available across the series, it fits most popular transmissions, and 12 output shaft options cover the most common pump types. Five speed ratios offer application flexibility. Intermittent torque ratings across the series range from 325 to 400 lb-ft at 1,000 RPM depending on the speed ratio selected. Call us to confirm proper fit for your transmission and pump combination.
Features
Integral air-shift design with no exposed air cylinder
6-bolt cast iron housing for secure, straightforward mounting
Fits most popular transmissions via 17 input gear sets across the SH Series
12 output shaft options to match most common pump types
5 speed ratios for application versatility
SH Series intermittent torque capacity up to 400 lb-ft at 1,000 RPM (speed-ratio dependent)
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
