The Muncie SH6B-U6809-E1EX (also referenced as SH6BU6809E1EX) is an SH Series air-shift-only power take-off built for high-torque applications. The integral air shift design keeps the air cylinder fully enclosed within the housing, eliminating exposed external components. Mounting uses a 6-bolt cast iron housing for strength and straightforward installation. The SH Series spans 17 input gear sets to fit most popular transmissions, 5 speed ratios for versatility, and 12 output shaft options to match most common pump configurations. Torque ratings vary by speed ratio, topping out at 400 lb-ft intermittent and 280 lb-ft continuous at the 05 and 07 ratio positions. Call us to confirm proper fit for your transmission and pump setup.
Features
Integral air shift design with no exposed air cylinder
6-bolt cast iron housing for strength and easy mounting
17 input gear sets to fit most popular transmissions
5 speed ratios for application versatility
12 output shaft options to match most popular pump types
Up to 400 lb-ft intermittent torque and 280 lb-ft continuous torque (at 05 and 07 speed ratios)
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
