The Muncie SH6D-S6812-A3CX (also referenced as SH6DS6812A3CX) is an SH Series air-shift-only power take-off built for high-torque applications. The integral air shift design keeps the air cylinder fully enclosed within the housing, with no exposed external components. The 6-bolt cast iron housing simplifies mounting on most popular transmissions, with 17 input gear sets covering a broad range of transmission applications. Five speed ratios are available across the series, and 12 output shaft options allow the unit to drive most common pump types. Intermittent torque capacity reaches 400 ft-lb at ratio codes 05 and 07 and 375 ft-lb at ratio code 09, per the SH Series ratings table. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Integral air shift design with no exposed air cylinder
6-bolt cast iron housing for secure, straightforward mounting
17 input gear sets to fit most popular transmission applications
12 output shaft options compatible with most common pump types
5 speed ratios available across the SH Series
Intermittent torque up to 400 ft-lb (542 Nm) at speed ratios 05 and 07
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
