The Muncie SH6F-F8409-A3KX is a 6-bolt, air-shift-only power take-off from Muncie's SH Series, engineered to fill the torque gap between the TG and 82 Series. Its integral air shift design keeps the air cylinder fully enclosed inside the housing, eliminating exposure to road debris. The 6-bolt cast iron housing mounts straight to the transmission, and 17 input gear sets cover most popular transmission applications. Five speed ratios and 12 output shaft options allow this unit to match a wide range of hydraulic pump setups. Intermittent torque capacity varies by speed ratio, reaching up to 400 lb-ft (542 Nm) at the 05 and 07 ratios. Also referenced as SH6FF8409A3KX. Available from Pro Gear and Transmission, call us to confirm proper fit for your application.
Features
Air shift only design with integral, fully enclosed air cylinder
6-bolt cast iron housing for direct transmission mounting
17 input gear sets to fit most popular transmissions
5 speed ratios with intermittent torque ratings from 325 to 400 lb-ft (441-542 Nm)
Continuous torque ratings from 228 to 280 lb-ft (309-379 Nm) depending on speed ratio
12 output shaft options to match most popular hydraulic pump types
Tech Specs
- Height: 11.63 in.
- Width: 13.38 in.
- Length: 15.63 in.
- Housing: 6-bolt cast iron
- Shift type: Air shift only
- Input gear sets: 17
- Speed ratios available: 5
- Output shaft options: 12
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
