The Muncie SH6S-F6312-E1IX (also referenced as SH6SF6312E1IX) is an SH6 Series air-shift power take-off built for high-torque applications. Muncie positions this series between the TG and 82 Series, and it uses an integral air shift design with no exposed air cylinder. The 6-bolt cast iron housing simplifies mounting and provides structural strength. The SH Series supports 17 input gear sets to cover most popular transmissions, 12 output shaft options to fit most popular pump types, and 5 speed ratios. Torque ratings vary by speed ratio - up to 400 lb-ft intermittent and 280 lb-ft continuous at the 05 and 07 ratios. A genuine Muncie part from Pro Gear and Transmission. Call us to confirm proper fit for your transmission and pump configuration.
Features
Integral air shift design - no exposed air cylinder
6-bolt cast iron housing for strength and straightforward mounting
17 input gear sets covering most popular transmissions
12 output shaft options to match most popular pump types
5 available speed ratios for application versatility
High-torque capacity bridging the gap between Muncie TG and 82 Series
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
