The Muncie SH6S-U6005-E3IP or SH6SU6005E3IP is an SH Series air-shift power take-off built for high-torque applications, filling the range between Muncie's TG and 82 Series. It mounts via a 6-bolt cast iron housing and uses an integral air shift design with no exposed air cylinder. The unit is compatible with 17 input gear sets covering most popular transmissions, and offers 12 output shaft options to match common pump configurations. Five speed ratios give setup flexibility across a range of vocational installations. At speed ratio 05 or 07, the SH Series is rated for 400 ft-lb intermittent torque and 280 ft-lb continuous torque at 1,000 RPM. Call us to confirm proper fit for your specific transmission and application.
Features
Integral air shift design with no exposed air cylinder
6-bolt cast iron housing for secure, high-strength mounting
17 input gear sets compatible with most popular transmissions
12 output shaft options to fit most common pump types
5 available speed ratios for application flexibility
Rated up to 400 ft-lb intermittent torque and 280 ft-lb continuous torque at 1,000 RPM (ratios 05 and 07)
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
