The Muncie SH8B-S6813-A1BX is an SH Series power take-off built for high-torque applications. It uses an integral air shift design with no exposed air cylinder, and mounts via an 8-bolt cast iron housing. The SH Series bridges the gap between Muncie's TG and 82 Series, offering 17 input gear sets to fit most popular transmissions and 12 output shaft options to match common pump configurations. Five speed ratios cover a wide range of drive requirements, from a speed ratio of 05 through 13. At ratios 05 and 07, intermittent torque capacity reaches 400 lb-ft (542 Nm) at 1,000 RPM. Also referenced as SH8BS6813A1BX. Call us to confirm proper fit for your application.
Features
Integral air shift design with no exposed air cylinder
8-bolt cast iron housing for straightforward mounting and structural strength
17 input gear sets to fit most popular transmission models
5 available speed ratios covering ratios 05, 07, 09, 12, and 13
Intermittent torque capacity up to 400 lb-ft (542 Nm) at 1,000 RPM at ratios 05 and 07
12 output shaft options to suit most common hydraulic pump configurations
Tech Specs
- Speed Ratio 05: 76 HP intermittent @ 1,000 RPM | 400 lb-ft intermittent torque | 280 lb-ft continuous torque
- Speed Ratio 07: 76 HP intermittent @ 1,000 RPM | 400 lb-ft intermittent torque | 280 lb-ft continuous torque
- Speed Ratio 09: 71 HP intermittent @ 1,000 RPM | 375 lb-ft intermittent torque | 263 lb-ft continuous torque
- Speed Ratio 12: 62 HP intermittent @ 1,000 RPM | 325 lb-ft intermittent torque | 228 lb-ft continuous torque
- Speed Ratio 13: 62 HP intermittent @ 1,000 RPM | 325 lb-ft intermittent torque | 228 lb-ft continuous torque
- Housing: 8-bolt cast iron
- Shift type: Air shift only
- Input gear sets: 17
- Output shaft options: 12
- Speed ratios available: 5
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
Speed Ratio | Intermittent HP@1000 RPM | Intermittent Torque lbs.ft. | Continuous Torque lbs.ft. | Intermittent (kw)@1000 RPM | Intermittent Torque (NM) | Continuous Torque (NM) |
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
