The Muncie SH8S-M6512-A3PX or SH8SM6512A3PX is an air-shift-only power take-off from the Muncie SH Series, designed for high-torque applications that fall between the TG and 82 Series in capacity. The housing is 8-bolt cast iron, measuring 11.63 in. tall, 13.38 in. wide, and 15.63 in. long. The integral air shift design eliminates any exposed air cylinder, keeping the installation clean and protected. With 17 input gear sets available across the SH Series, it fits most popular transmissions, and 12 output shaft options accommodate most common pump types. Five speed ratios cover a wide range of drive requirements. Torque ratings vary by speed ratio - at ratio 05 or 07, intermittent torque reaches 400 lb-ft with continuous-duty rated at 280 lb-ft. Call us to confirm the correct speed ratio and output shaft configuration for your application.
Features
Integral air shift design - no exposed air cylinder
8-bolt cast iron housing, 11.63 in. x 13.38 in. x 15.63 in.
5 speed ratios available across the SH Series
17 input gear sets to fit most popular transmissions
12 output shaft options to suit most common pump types
High-torque capacity - intermittent torque up to 400 lb-ft (542 Nm) depending on speed ratio
Tech Specs
- Housing Bolt Pattern: 8-bolt
- Housing Material: Cast iron
- Housing Height: 11.63 in.
- Housing Width: 13.38 in.
- Housing Length: 15.63 in.
- Shift Type: Air shift only (integral, no exposed air cylinder)
- Speed Ratios Available (SH Series): 05, 07, 09, 12, 13
- Intermittent Torque - Ratio 05 or 07: 400 lb-ft (542 Nm)
- Continuous Torque - Ratio 05 or 07: 280 lb-ft (379 Nm)
- Intermittent Torque - Ratio 09: 375 lb-ft (508 Nm)
- Continuous Torque - Ratio 09: 263 lb-ft (356 Nm)
- Intermittent Torque - Ratio 12 or 13: 325 lb-ft (441 Nm)
- Continuous Torque - Ratio 12 or 13: 228 lb-ft (309 Nm)
- Intermittent HP @ 1000 RPM - Ratio 05 or 07: 76 HP (57 kW)
- Intermittent HP @ 1000 RPM - Ratio 09: 71 HP (53 kW)
- Intermittent HP @ 1000 RPM - Ratio 12 or 13: 62 HP (46 kW)
- Input Gear Sets Available (SH Series): 17
- Output Shaft Options Available (SH Series): 12
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
