The NTN UCP310HT2D1 is a tapered roller bearing cup with an 85 mm outside diameter and a 17.462 mm cup width, held to ABMA Class 4 (Inch) tolerance. Tapered roller bearings run cone-shaped rollers on matching cone-shaped races, so a single bearing can carry both side loads and end thrust. Check the outside diameter and width against the cup you are removing before you order. Sold by Pro Gear and Transmission. Not sure of the size? Give us a call.
Features
Tapered roller bearing cup, NTN part number UCP310HT2D1
85 mm outside diameter
17.462 mm cup width
ABMA Class 4 (Inch) tolerance class
Conical roller geometry carries both radial and axial loads
Tech Specs
- Outside Diameter: 85 mm
- Cup Width: 17.462 mm
- Tolerance Class: ABMA Class 4 (Inch)
