84115 Permatex Plastic Welder .84 oz.

84115 Permatex Plastic Welder in an .84 oz. size is a structural adhesive made for general purpose bonding. It joins hard and soft plastics to specified surfaces, and it also holds composites, ceramics and wood to each other or to plastic, with no primer. The mixed adhesive gels in 5-6 minutes, fixtures in 9-10 minutes, and sets at room temperature. It is a cream color, fills gaps to 0.125 inch, and resists water and many chemicals. It will not bond most polyethylene or polypropylene plastics, so check the material first. Sold by Pro Gear and Transmission.

Features

Structural adhesive for general purpose bonding, .84 oz.
Joins hard and soft plastics, composites, ceramics and wood in any pairing
No primer needed, gels in 5-6 minutes, fixtures in 9-10 minutes
Fills gaps to 0.125 inch, water resistant, good chemical resistance
Will not bond most polyethylene or polypropylene plastics

Additional Information

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5 – 6 minutes and fixturing in 9 – 10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch. Water resistant and good chemical resistance. Temperature range -60°F to 250°F (-51°C to 121°C). Permanent strength up to 3500 PSI.