The Chelsea 442 Series Power Take-Off, part number 442XHAHX-A3RK or 442XHAHXA3RK, is a 6-bolt mounting PTO built around a cast iron housing with tapered cone bearings on the output shaft. The 442 Series uses a wire/cable mechanical shift and carries a round shaft output with a 1-1/4" key. Intermittent torque for the series ranges from 201 to 300 lb-ft, with shaft power rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. Common applications in this series include dump trucks, tow and recovery trucks, service trucks, and aerial equipment. Call us to confirm proper fit and shift configuration for your specific transmission.
Features
Chelsea 442 Series, 6-bolt mounting for broad transmission compatibility
Cast iron housing with tapered cone bearings on the output shaft
Wire/cable mechanical shift type
Round shaft output, 1-1/4" key drive
Intermittent torque rating: 201-300 lb-ft (series rating; verify actual rating for your application)
Suited for dump trucks, service trucks, tow and recovery trucks, and aerial equipment
Tech Specs
- Mounting Type: 6-Bolt
- Shift Type: Wire/Cable, Mechanical
- Output Shaft Type: Round Shaft, 1-1/4" Key
- Intermittent Torque (Series): 201-300 lb-ft / 301-400 Nm (check application pages for actual rating)
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
- Continuous Torque: De-rate torque rating 30% (check application pages for actual rating)
- Housing Material: Cast Iron
- Output Bearings: Tapered Cone Bearings
- Lubrication: No Pressure Lube (X designation)
- Product Series: 442
