The Chelsea 442 Series Power Take-Off, part number 442XRBQX-W4RA or 442XRBQXW4RA, is a 6-bolt mounting PTO built around a cast iron housing with tapered cone bearings on the output shaft. The 442 Series carries an intermittent torque rating of 201-300 lb-ft and delivers up to 48 HP at 1,000 RPM via a round shaft with 1-1/4" key. Shift type for this series is wire/cable or mechanical. The series supports up to 36 output configurations including Chelsea's 360-degree rotatable flange, and eleven internal speed ratios. Typical applications include dump trucks, tow and recovery trucks, service trucks, and aerial units. Call us to confirm proper fit for your application.
Features
Chelsea 442 Series, 6-bolt mounting for broad transmission compatibility
Cast iron housing with tapered cone bearings on the output shaft
Intermittent torque rating: 201-300 lb-ft (series rating; verify for your application)
Output: up to 48 HP at 1,000 RPM via round shaft with 1-1/4" key
Wire/cable or mechanical shift type
Rotatable output flange supports 360-degree repositioning for clearance
Tech Specs
- Mounting Type: 6-Bolt
- Shift Type: Wire/Cable or Mechanical
- Output Shaft Type: Round Shaft, 1-1/4" Key
- Intermittent Torque (Series): 201-300 lb-ft / 301-400 Nm (verify actual rating for your application)
- Output Power (Series): 46-55 HP / 31-40 kW
- Shaft Power: 24 HP at 500 RPM; 48 HP at 1,000 RPM
- Dimensions (H x W x L): 8 in. x 10 in. x 14 in.
- Lubricant: No Pressure Lube (X designation)
