The Chelsea 489 Series Power Take-Off, part number 489QHLZX-V3RB or 489QHLZXV3RB, is built for manual transmissions with an 8-bolt PTO mounting aperture, including Eaton Fuller, Eaton Endurant, Mack, and Tremec gearboxes. The one-piece cast iron housing bolts directly to the transmission opening, eliminating the need for an adapter plate and reducing potential leak paths. The 489 Series uses wire/cable mechanical shift and features tapered bearings for greater load capacity than needle-bearing designs. Intermittent torque rating for the series runs 201 to 300 lb-ft. The output shaft is a round shaft with a 1-1/4-inch key. Call us to confirm proper fit for your transmission and application.
Features
Chelsea 489 Series PTO, part number 489QHLZX-V3RB or 489QHLZXV3RB
8-bolt direct mount to manual transmission opening, no adapter plate required
One-piece cast iron housing reduces potential leak paths
Wire/cable mechanical shift actuation
Series intermittent torque rating: 201 to 300 lb-ft (301 to 400 Nm)
Round output shaft with 1-1/4-inch key; output power up to 46-55 HP at rated speed
Compatible with Eaton Fuller, Eaton Endurant, Mack, and Tremec manual transmissions
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Output Shaft Type: Round Shaft, 1-1/4 inch Key
- Intermittent Torque (Series): 201 to 300 lb-ft (301 to 400 Nm)
- Output Power (Series): 46 to 55 HP (31 to 40 kW)
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1000 RPM
- Housing Material: One-piece cast iron
- Compatible Transmissions: Eaton Fuller, Eaton Endurant, Mack, Tremec (8-bolt aperture)
