The Chelsea 489XLAHX-V3RF or 489XLAHXV3RF is a 489 Series Power Take-Off built for manual transmissions with an 8-bolt PTO mounting aperture. The one-piece cast iron housing bolts directly to the 8-bolt opening, eliminating the need for an adapter plate and reducing potential leak paths. This series delivers intermittent torque in the 201-300 lb-ft range and output power from 46 to 55 HP, with shaft power rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. Shift type is wire/cable mechanical. The round output shaft uses a 1-1/4" keyed configuration. Strong tapered bearings replace needle bearings for greater load capacity. Compatible transmissions include Eaton Fuller, Eaton Endurant, Mack, and Tremec. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening, no adapter plate required
Wire/cable mechanical shift type
Intermittent torque rating: 201-300 lb-ft (301-400 Nm)
Output power: 46-55 HP; shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
1-1/4" round keyed output shaft
Tapered bearings for greater load-bearing capacity vs. needle bearings
Internal parts common to Chelsea 442 Series
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Intermittent Torque: 201-300 lb-ft (301-400 Nm)
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
- Output Shaft Type: Round Shaft, 1-1/4" Keyed
- Housing Material: One-Piece Cast Iron
- Compatible Transmissions: Eaton Fuller, Eaton Endurant, Mack, Tremec (8-bolt aperture)
- Dimensions (H x W x L): 15 in. x 12 in. x 14 in.
